ROLLERI by Wongtanawoot: ROLLERI PROFESSIONAL BENDING

PUNCHES ROLLERI TYPE R1

- Compatibility ใช้ได้กับเครื่องพับหลากหลายรุ่นดังนี้

ACL, Accurpress, AM Machinery, Amada, Atlantic, Adira, Baykal, BL, Boschert, Boutillon, Bystronic-Beyeler Euro-B, Coastone, Colgar, Dener, Deratech, Durmazlar, Ermaksan, Farina, Gade, Gasparini, Gizelis, Haco, Hindustan, Iturrospe, Jfy, JMT, LFK, Metfab, MVD, Oriance, Prima Power, Promecam, Rico, Salvagnini, Schiavi, SMD, Sorg, Somo, Vicla, Vimercati, Warcom, Yangli, Yawei, Ysd, etc.

- Our Advantages – Your Convenience - จุดเด่นของใบมีดพับ Rolleri R1

• own production facilities (no reseller or dealer)

• every single tool is traceable thanks to a unique serial number stamped after the first quality control

• precision grinding (tolerance of +/-0.01 mm)

• guaranteed tool reproduction

• exact parallelism

• precise, consistent working height

• tang retrofitting and modifications possible (see pages 264-265)

• very large stock availability

- Material วัสดุของชุดใบมีดพับ Rolleri

Raw material is provided by qualified suppliers and chemical composition corresponds to international standards.

Therefore, raw material yield and tensile strength are guaranteed.

Material Type	Mechanical resistance of the material and the tool body	Hardness of the material and the tool body	Hardness of the operating surfaces after induction hardening
42CrMo4	900-1150 N/mm²	29.1 - 36.9 HRC	54 - 60 HRC
C45	560-710 N/mm²	12 - 15.5 HRC	54 - 60 HRC

• Specifications for the maximum press force kN/m are indicated as such, 1 t = 10 kN.

------------------------------------------------------------------------------------------------------------------------------------------------

DIES ROLLERI TYPE R1

- Compatibility ใช้ได้กับเครื่องพับหลากหลายรุ่นดังนี้

press brakes (60 mm clamping-width) from: ACL, Accurpress, AM Machinery, Amada, Atlantic, Adira, Baykal, BL, Boschert, Boutillon, Bystronic-Beyeler Euro-B, Coastone, Colgar, Dener, Deratech, Durmazlar, Ermaksan, Farina, Gade, Gasparini, Gizelis, Haco, Hindustan, Iturrospe, Jfy, JMT, LFK, Metfab, MVD, Newton, Oriance, Prima Power, Promecam, Rico, Salvagnini, Schiavi, SMD, Sorg, Somo, Vicla, Vimercati, Warcom, Yangli, Yawei, Ysd, etc.

- Our Advantages – Your Convenience - จุดเด่นของใบมีดพับ Rolleri R1

• own production facilities (no reseller or dealer)
• every single tool is traceable thanks to a unique serial number stamped after the first quality control
• precision grinding (tolerance of +/-0.01 mm)
• guaranteed tool reproduction
• exact parallelism
• precise, consistent working height
• modifications possible (see pages 266-269)
• very large stock availability

- Material วัสดุของชุดใบมีดพับ Rolleri

Raw material is provided by qualified suppliers and chemical composition corresponds to international standards.
Therefore, raw material yield and tensile strength are guaranteed.

Material Type	Mechanical resistance of the material and the tool body	Hardness of the material and the tool body	Hardness of the operating surfaces after induction hardening
42CrMo4	900-1150 N/mm²	29.1 - 36.9 HRC	54 - 60 HRC
C45	560-710 N/mm²	12 - 15.5 HRC	54 - 60 HRC

• Specifications for the maximum press force kN/m are indicated as such, 1 t = 10 kN.

------------------------------------------------------------------------------------------------------------------------------------------------

PUNCHES ROLLERI TYPE R2

- Compatibility ใช้ได้กับเครื่องพับหลากหลายรุ่นดังนี้

LVD, Trumpf, Darley, Safan or on press brakes with System NSCL (New Standard Clamping)

- Our Advantages – Your Convenience - จุดเด่นของใบมีดพับ Rolleri R2

• own production facilities (no reseller or dealer)
• every single tool is traceable thanks to a unique serial number stamped after the first quality control
• precision grinding (tolerance of +/-0.01 mm)
• guaranteed tool reproduction
• exact parallelism
• precise, consistent working height
• tang retrofitting and modifications possible (see pages 264-265)
• very large stock availability

- Material วัสดุของชุดใบมีดพับ Rolleri

Raw material is provided by qualified suppliers and chemical composition corresponds to international standards.
Therefore, raw material yield and tensile strength are guaranteed.

Material Type	Mechanical resistance of the material and the tool body	Hardness of the material and the tool body	Hardness of the operating surfaces after induction hardening
42CrMo4	900-1150 N/mm²	29.1 - 36.9 HRC	54 - 60 HRC
C45	560-710 N/mm²	12 - 15.5 HRC	54 - 60 HRC

• Specifications for the maximum press force kN/m are indicated as such, 1 t = 10 kN.

------------------------------------------------------------------------------------------------------------------------------------------------

DIES ROLLERI TYPE R2

- Compatibility ใช้ได้กับเครื่องพับหลากหลายรุ่นดังนี้

13 x 20 mm (0.51 x 0.79 in) groove in the table: Bystronic-Beyeler, Safan, SMD, Trumpf, Darley,
press brake machines with System NSCR

- Our Advantages – Your Convenience - จุดเด่นของใบมีดพับ Rolleri R2

- Material วัสดุของชุดใบมีดพับ Rolleri

Raw material is provided by qualified suppliers and chemical composition corresponds to international standards.
Therefore, raw material yield and tensile strength are guaranteed.

Material Type	Mechanical resistance of the material and the tool body	Hardness of the material and the tool body	Hardness of the operating surfaces after induction hardening
42CrMo4	900-1150 N/mm²	29.1 - 36.9 HRC	54 - 60 HRC
C45	560-710 N/mm²	12 - 15.5 HRC	54 - 60 HRC

• Specifications for the maximum press force kN/m are indicated as such, 1 t = 10 kN.

------------------------------------------------------------------------------------------------------------------------------------------------

PUNCHES ROLLERI TYPE R3

- Compatibility ใช้ได้กับเครื่องพับหลากหลายรุ่นดังนี้

- Bystronic-Beyeler RFA
- Bystronic-Beyeler RF
- Bystronic-Beyeler R
- Bystronic-Beyeler S

- Our Advantages – Your Convenience - จุดเด่นของใบมีดพับ Rolleri R3

• own production facilities (no reseller or dealer)
• every single tool is traceable thanks to a unique serial number stamped after the first quality control
• precision grinding (tolerance of +/-0.01 mm)
• guaranteed tool reproduction
• exact parallelism
• precise, consistent working height
• tang retrofitting and modifications possible
(see pages 264-265)
• very large stock availability

- Material วัสดุของชุดใบมีดพับ Rolleri

Raw material is provided by qualified suppliers and chemical composition corresponds to international standards.
Therefore, raw material yield and tensile strength are guaranteed.

Material Type	Mechanical resistance of the material and the tool body	Hardness of the material and the tool body	Hardness of the operating surfaces after induction hardening
42CrMo4	900-1150 N/mm²	29.1 - 36.9 HRC	54 - 60 HRC
C45	560-710 N/mm²	12 - 15.5 HRC	54 - 60 HRC

• Specifications for the maximum press force kN/m are indicated as such, 1 t = 10 kN.

------------------------------------------------------------------------------------------------------------------------------------------------

DIES ROLLERI TYPE R3

- Compatibility ใช้ได้กับเครื่องพับหลากหลายรุ่นดังนี้

press brakes with a table groove 13 x 20 mm (0.51 x 0.79 in): Bystronic-Beyeler, Safan, SMD, Trumpf, Darley, press brake machines with System NSCR

- Our Advantages – Your Convenience - จุดเด่นของใบมีดพับ Rolleri R3

- Material วัสดุของชุดใบมีดพับ Rolleri

Raw material is provided by qualified suppliers and chemical composition corresponds to international standards.
Therefore, raw material yield and tensile strength are guaranteed.

Material Type	Mechanical resistance of the material and the tool body	Hardness of the material and the tool body	Hardness of the operating surfaces after induction hardening
42CrMo4	900-1150 N/mm²	29.1 - 36.9 HRC	54 - 60 HRC
C45	560-710 N/mm²	12 - 15.5 HRC	54 - 60 HRC

• Specifications for the maximum press force kN/m are indicated as such, 1 t = 10 kN.

------------------------------------------------------------------------------------------------------------------------------------------------

TOOLS ROLLERI TYPE RX

- Compatibility ใช้ได้กับเครื่องพับหลากหลายรุ่นดังนี้

LVD, EHT, Weinbrenner, Hämmerle-Bystronic, Colly, Gasparini, Colgar, Ajial-Axial, American, etc.

- Our Advantages – Your Convenience - จุดเด่นของใบมีดพับ Rolleri RX

• own production facilities (no reseller or dealer)
• every single tool is traceable thanks to a unique serial number stamped after the first quality control
• precision grinding (tolerance of +/-0.01 mm)
• guaranteed tool reproduction
• exact parallelism
• precise, consistent working height
• tang retrofitting and modification possible
(see pages 264-269)
• very large stock availability

- Material วัสดุของชุดใบมีดพับ Rolleri

Raw material is provided by qualified suppliers and chemical composition corresponds to international standards.
Therefore, raw material yield and tensile strength are guaranteed.

Material Type	Mechanical resistance of the material and the tool body	Hardness of the material and the tool body	Hardness of the operating surfaces after induction hardening
42CrMo4	900-1150 N/mm²	29.1 - 36.9 HRC	54 - 60 HRC
C45	560-710 N/mm²	12 - 15.5 HRC	54 - 60 HRC

• Specifications for the maximum press force kN/m are indicated as such, 1 t = 10 kN.

------------------------------------------------------------------------------------------------------------------------------------------------

ROLLERI ROLLA-V ONYX DIES

- Compatibility ใช้ได้กับเครื่องพับหลากหลายรุ่นดังนี้

• RVP Dies (Models 1, 2, 3) are compatible with press brake machines (60 mm / 2.36 in die holder) from: ACL, Accurpress, AM Machinery, Amada, Atlantic, Adira, Baykal, BL, Boschert, Boutillon, Bystronic-Beyeler Euro-B, Coastone, Colgar, Dener, Deratech, Durmazlar, Ermaksan, Farina, Gade, Gasparini, Gizelis, Haco, Hindustan, Iturrospe, Jfy, LFK, MVD, Newton, Prima Power, Promecam, Rico, Salvagnini, Schiavi, SMD, Sorg, Somo, Vicla, Vimercati, Warcom, Yangli, Yawei, Ysd, etc.
• RVS Dies (Models 1, 2, 3) are compatible with press brake machines (14 mm / 0.55 in tang) from: Amada Single V style
• RVT Dies (Models 1, 2, 3) are compatible with press brake machines (12.7 mm / 0.50 in / 13 mm / 0.51 in tang) from: Bystronic, Hämmerle, Beyeler, Edwards, Safan, SMD, Trumpf
• RVT90 Dies (Models 1, 2, 3) are compatible withpress brakes machines (12.7 mm / 0.50 in tang) from: LVD
• RVM Dies (Models 2.5, 3, 4) are compatible withall press brake machines (various die holders)
• all dies can be mounted in other press brakes by usingadapters or customized die holders.

- Our Advantages – Your Convenience - จุดเด่นของใบมีดพับ Rolleri

• no corrosion
• fast and easy tool change
• new design
• longer operational life
• high precision
• interchangeability guaranteed
• reduction of bending marks on the sheet metal
• small flanges bent without marks
• No metal residue left on tools during bending of galvanized sheet metal
• ideal for profiles with oblique sides

- Material วัสดุของชุดใบมีดพับ Rolleri

Raw material is provided by qualified suppliers and chemical composition corresponds to international standards.
Therefore, raw material yield and tensile strength are guaranteed.

	Model	Material Type	Hardness of the material and the tool body	Hardness of the operating surfaces after induction hardening
Body	1 / 2 / 2.5 / 3 / 4	42CrMo4	1100-1200 N/mm²	55 HRc
Inserts	1 / 2 / 2.5	Toolox 44	1450 N/mm²	through hardened 44 HRc
Inserts	3 / 4	Toolox 33	1100 N/mm²	55 HRc

• Specifications for the maximum press force kN/m are indicated as such, 1 t = 10 kN.

------------------------------------------------------------------------------------------------------------------------------------------------

ROLLERI CLAMPING SYSTEMS

- ROLLERI presents his latest innovation:

The new clamping ROL200 for Punches! Compatible with: NEW Amada, Boschert, Bystronic-Beyeler Euro-B, Durmazlar, Ermaksan, Gasparini, Haco, Promecam, etc. The new patented system enables manual, pneumatic or hydraulic vertical clamping of your top tools. The special features are the enormously simple handling and the surprisingly low price, which guarantees huge efficiency. It is available as retrofitting as well as original equipment. This new clamping is a revolution in the market of press brake tooling!
• fast vertical tool change for all Rolleri R1 type punches
• can be used without modifying Rolleri R1 type punches
• safe and fast tool change
• substantial improvement in time consumption and related costs
• secure against tool falling down
• available in manual, pneumatic and hydraulic models
• mounting: Simply from the bottom into the housing, tighten – DONE!
• disassembly: Untighten, gently lift tool and remove it downwards.
• easy to mount on your press brake. Modification of the press brake is not necessary.

------------------------------------------------------------------------------------------------------------------------------------------------

ROLLERI ADAPTERS

------------------------------------------------------------------------------------------------------------------------------------------------

ROLLERI MARK FREE BENDING

One of the challenges of bending is preventing the profile from having bending marks, such as scratches and abrasions on the surface areas.

Especially profiles made of:

• Stainless Steel

• Aluminium

• painted metal panels

often show lines in the contact areas between sheet metal and die. This is the consequence of friction occurring when bending sheet metal with dies with small radius on the V opening. In order to prevent this marking, the following solutions

are possible:

• Bending Foil

• Polyurethane inserts

• Synthetic Dies

• ROLLA-V

• enlarged radius on the V opening of a die

------------------------------------------------------------------------------------------------------------------------------------------------

ROLLERI SPECIAL AND HEAVY DUTY TOOLS

- Our Advantages – Your Convenience - จุดเด่นของใบมีดพับ Rolleri

• in-house construction and production (no reseller or dealer)
• competent consulting
• custom-made solutions
• every single tool is traceable thanks to a unique serial number stamped after the first quality control
• precision grinding (tolerance of +/-0.01mm)
• guaranteed tool reproduction
• exact parallelism
• bending tests upon request

- Special Tooling for:
• Z-Profiles
• Omega-Profiles
• Trapezoidal Profiles
• Coining
• Special hemming
• Hinges
• Large-radius bends
• Special Profiles
• etc.

- Material วัสดุของชุดใบมีดพับ Rolleri

Raw material is provided by qualified suppliers and chemical composition corresponds to international standards.
Therefore, raw material yield and tensile strength are guaranteed.

Material Type	Mechanical resistance of the material and the tool body	Hardness of the material and the tool body	Hardness of the operating surfaces after induction hardening
42CrMo4	900-1150 N/mm²	29.1 - 36.9 HRc	54 - 60 HRc
C45	560-710 N/mm²	12 - 15.5 HRc	54 - 60 HRc
1.2767	830 N/mm²	22 - 25 HRc	54 - 60 HRc

• Specifications for the maximum press force kN/m are indicated as such, 1 t = 10 kN.

------------------------------------------------------------------------------------------------------------------------------------------------

ROLLERI MODIFICATIONS

Modified Tangs
• Rolleri Punches Type R1, R2, and R3 can be used on other press brake machines by modifying the tang.
• Precision ground (Tolerance of +/-0.01 mm)
• exact parallelism
• fast, convenient, precise

------------------------------------------------------------------------------------------------------------------------------------------------

ROLLERI ACCESSORIES AND SHEAR BLADES

- Our Advantages – Your Convenience - จุดเด่นของใบมีดพับ Rolleri
• Protection against contamination and damage
• Easy access to tools
• Robust construction
• Clear and tidy storage
• Grooves in the construction to position easily the cabinet by means of fork lift trucks
• Painted shelves with variable positioning into drawers

------------------------------------------------------------------------------------------------------------------------------------------------

ABOUT US / VARIOUS INFORMATION

#ใบมีดพับ #เครื่องพับ #Press_Brake #Press_Brake_Tools #Rolleri #วงศ์ธนาวุฒิ #จำหน่ายมีดพับ #จำหน่ายใบมีดเครื่องพับ #Training_การใช้งานเครื่องพับ #wongtanawoot #Rolleri_press_brake_tool #ใบมีดพับ #เครื่องพับ #ใบพับ

ติดต่อสอบถามข้อมูลเพิ่มเติมได้ที่ ศูนย์วิจัยและพัฒนางานแปรรูปโลหะแผ่น
โดย วงศ์ธนาวุฒิ โทร. +66.2.899.6374 หรือ +66.86.308.0698

85 ถ.กาญจนาภิเษก แขวงบางบอน เขตบางบอน กรุงเทพฯ 10150
Sheet Metal Solution Center By WONGTANAWOOT
Email :info@pcb-bangkok.com
WebSite :http://www.pcb-bangkok.com/
FaceBook :https://www.facebook.com/pcb.bangkok.by.wongtanawoot
YouTube : https://www.youtube.com/playlist?list=PLuzTqmkxgDC3TxmBm7Q-8n64UKYkN8oUM
Blog :http://rolleri-wtw.blogspot.com/
Line ID : https://line.me/R/ti/p/%40jvf2145w

หน้าเว็บ

วันศุกร์ที่ 9 ธันวาคม พ.ศ. 2559

ROLLERI PROFESSIONAL BENDING

ไม่มีความคิดเห็น :

แสดงความคิดเห็น